Museum Deals With Their Hands

Diamond mosaic
1. The kit includes a paper substrate that is covered by a special cell. There is a sketch on the substrate with symbols of the colours used. A special protective film shall be placed on the top of the adhesion, which shall be suspended as the work is performed.
2. Mosaic details are squares of solid plastic size 2, 5 x 2, 5 mm. The upper part of each part has nine lines that reflect the light. Because of this effect, this kind of creativity is called ALMAZ ELECTION.
3. Details of almasics in the kit are scattered by bags, which in turn are labelled with colours on the chart. In order to be comfortable with such little details, the kit contains pinks and pans for mosaic details.
4. Start the job by opening up a small section of the scheme, lifting and igniting the protective layer. It's best not to open the whole scheme just so you don't touch it with your hands, and the viscosity of the adhesive. In the table, find a number corresponding to the symbol on the chart. From the bagel with this number, put a little bit of detail in the pan.
5. With a pinkette, put the details on the adhesive base of the scheme with a little bit of pinkette. Try to make the almasics as stable as possible and closer to each other when they stick.
6. After all the details of the almasics have been glued and you have a beautiful and transfusing picture, the paper substrate needs to be attached to the hard, preferably wooden surface of the appropriate size and placed the picture in the frame.
7. If the picture is composed of several parts, the vertical column or the horizontal line in the connections of these parts shall be left in each part.
8. Each paper part is placed on a solid basis, and then the details of almasis in empty poles or lines and the picture is ready!